Free Shipping on orders over $300. Some exceptions apply 1-866-361-4782

PEX Tubing | RHT PEX B Tubing Oxygen-Barrier

RHT PEX B Tubing Oxygen-Barrier PEX tubing from RHT is your best choice for in-floor radiant heating. Our tubing is a crosslinked polyethylene PEX pipe (PEX-B) created with the silane cross-linking method (similar to Zurn PEX and Watts RadiantPEX). It fully meets today's strict ASTM F 876 and 877 standards for PEX radiant tubing. RHT Radiant PEX is produced with a strong Oxygen-Barrier and can be used with either ferrous or non ferrous systems. Coil lengths: 300ft, 500ft, 900ft, 1,000ft. Compatible with the following connection systems: Crimp Tool, Crimp Rings and Crimp Fittings Ratchet Clamp Tool, Stainless Steel Cinch Clamps,... Read more

RHT Prefabricated Electric Boiler Zone Valve Panel

RHT Prefabricated Electric Boiler Panels with Zone Valves and Grundfos UPSe PumpsSimplify Your Radiant Heating Project RHT Boiler Panels are an excellent value & time-saver, simplifying your radiant heat installation. On-site work will consist of connecting your supply & return lines to the boiler, supply & return lines to manifolds, site wiring and providing make-up water supply. These units are designed around the reliable Thermolec electric boiler line. Features: Primary/secondary loop design with air separator Grundfos UPSe multi speed ECM circulator pumps on the primary and secondary loops Watts ETX-30 expansion tank Grundfos Zone Valves Tapping for optional low water... Read more

RHT Prefab Spartan Electric 1-Zone Boiler Panels

RHT Spartan Prefab 1-Zone Electric Boiler Panels Fully Modulating Boiler with Outdoor Reset Radiant Heating Technology (RHT) Pre-Plumbed Panels are professionally engineered, manufactured and pressure-tested. Each panel comes complete with boiler, expansion tank and Taco 0018e ECM circulator pump. Panels are designed around the reliable Thermolec TMB Mini Boiler with H Stamp. Choose from three boiler sizes and a variety of manifold options. All components are securely attached to an aluminum panel, ready to be mounted and connected to your hydronic heating system. Panel size varies depending upon number of pumps, but typically they measure 36" wide x 36" high... Read more

RHT Floor Panel System For Radiant Heat Systems

RHT Floor Panel System Keeps Sandwich Style Radiant Floor Installations On Track The RHT floor panel system provides an easy, fast, and effective way to attach, guide, and install your PEX tubing effectively and cleanly. This system is designed to be used with ½" RHT PEX tubing. It features specially machined 180° turns, making installation a breeze. The RHT Floor Panel System also comes with custom heat transfer plates, which help secure the PEX tubing in their omega shaped (Ω) channels while allowing for a more efficient energy transfer, ensuring a more efficient and cost effective heating experience. Features: ¾"... Read more

RHT Prefabricated Dominator Pump Panel

RHT Dominator Pump Panels Choose the appropriate customized panel for your application Professionally manufactured, pre-assembled hydronic heating pump panels value-engineered to simplify your radiant heat installation. Customized pump panels save time on the job by reducing on-site work to connecting the supply and return lines to manifolds, basic electrical wiring, and hooking up the make-up water supply. BlueRidge Company technicians are ready to assist you with a total system design whether it is for one room, whole house, warehouse/workshop, condominium or commercial building. Call us at 866-361-4782 for a quote. Compatibility: HTP Elite Fire Tube Ultra (click here to view... Read more

RHT MAXIMA 6 Inch Extruded Heat Transfer Plates

RHT MAXIMA 6" Extruded Heat Transfer Plates Heat transfer just got a whole lot better! The first and only heavy duty 6" wide extruded heat transfer plate The only thick (1/16") extruded heat transfer plate 50% more surface coverage than conventional 4" extrusions 75% more aluminum material per foot 4' 8' 10' 20' options, custom orders for commercial or large scale residential application Radiant Floors, Ceilings and Walls Drilling required Maximum heat transfer These features all add up to greater heat transfer for the same installation cost and effort as compared with other extruded heat transfer plates on the market.... Read more

RHT Prefabricated Wood-Fired Boiler Pump Panel

RHT Wood-Fired Boiler Pump Panels Simple installation, trouble-free design RHT boiler panels are professionally manufactured and pre-assembled. RHT boiler panels are an excellent value & time-saver, simplifying your heating system installation.Features: 1" copper connections Energy-efficient Grundfos Alpha Pumps Mixing valve Single zone panel includes Taco Switching Relay, multi-zone panels include Tekmar Switching Relay Professionally plumbed and pressure tested Mounted to an aluminum panel with unistrut and cushion clamps. Panel size varies depending upon number of pumps, with the smallest being 2'x2' and largest being 3'x3' FREE shipping to all US addresses in the Lower 48. Additional fees apply to shipments... Read more

PEX Tubing | RHT PEX A Tubing Oxygen-Barrier

RHT RHT PEX A Tubing Oxygen-Barrier PEX tubing from RHT is your best choice for in-floor radiant heating. Our tubing is a crosslinked polyethylene PEX pipe (PEX-A) created with the peroxide cross-linking method (similar to Uponor PEX). It fully meets today's strict ASTM F 876 and 877 standards for PEX radiant tubing. RHT Radiant PEX is produced with a strong Oxygen-Barrier and can be used with either ferrous or non ferrous systems. Compatible with the following connection systems: Crimp Tool, Crimp Rings and Crimp Fittings Ratchet Clamp Tool, Stainless Steel Cinch Clamps, Crimp Fittings Press Tool, Stainless Steel Press Sleeves... Read more

RHT PEX B Tubing & Stainless Manifold Packages

RHT Oxygen Barrier PEX Tubing and High Flow Stainless Manifold Packages Perfect for Pole Barns, Shops, or DIY Home Projects Buy a Package & Save Money! Available with either ⅝" or ½" tubing. Radiant heating is the most clean and energy efficient way to heat your home, shop or warehouse and RHT Tubing and Manifold Packages have everything you need to install and pressure test your PEX prior to pouring concrete. Each package includes: RHT PEX B tubing with O2 Barrier RHT Stainless Steel manifold & adapters RHT pressure test kit 90 degree polymer bend supports PEX tubing cutter A... Read more

RHT Prefabricated Column Pump Panel

RHT Prefab Column Pump Panels Clean efficient fast. The only Radiant Heating Solution that ships standard with ECM pressure proportional pumps RHT boiler panels are professionally manufactured, pre-assembled, hydronic heating systems. RHT Boiler Panels are an excellent value & time-saver, simplifying your radiant heat installation with a clean custom solution. As the name suggests the RHT Column panel is designed for minimal building foot print a simple stack 30"x 8' will house both the pump panel and most wall mounted boilers. On-site work will be minimized to: 1) connecting your supply and return lines to manifolds, 2) electrical wiring and... Read more

RHT SS-HF Stainless Steel High Flow Manifolds

RHT SS Stainless Steel High Flow Manifolds New clean design ideal for Radiant heat applications. These manifolds are sold in pairs with both supply and return for closed loop non-potable hydronic heating systems with a maximum working temperature of 180° F. Both supply and return manifolds are provided with built in Temperature gauge in a dry well, boiler drain and air vent for easy purging of your hydronic system. Included: 1" NPT Straight (180°) Supply & Return Ball Valves 1/2" PEX A, B or C adapters 1" (ID) Extruded Stainless Steel Supply & Return Manifold Pair Manual Air Vent and... Read more

RHT Prefabricated Column Zone Valve Panel

RHT Prefab Column Zone Valve Panels The only Radiant Heating Solution that ships standard with ECM pressure proportional pumps RHT boiler panels are professionally manufactured, pre-assembled, hydronic heating systems. RHT Boiler Panels are an excellent value & time-saver, simplifying your radiant heat installation with a clean custom solution. As the name suggests the RHT Column panel is designed for minimal building foot print a simple stack 30"x 8' will house both the pump panel and most wall mounted boilers. On-site work will be minimized to: 1) connecting your supply and return lines to manifolds, 2) electrical wiring and 3) providing... Read more

RHT EZ Floor Concrete Insulation

RHT EZ Floor Concrete Insulation Panel System Fast. Easy. Save on labor. Just walk it in. RHT Under Concrete Insulation Panel System dramatically reduces installation time and labor cost, and provides a built-in method of optimizing heat dispersion after installation. Panels are manufactured in the USA out of BASF Styropor and Neopor EPS to offer superior strength and insulating properties. RHT's innovative snap-together, pre-molded tubing channel system allows for simple, efficient installation while maintaining proper tube alignment. RHT Under Concrete Insulation Floor Panels have 2" on center channels meaning the tube spacing could be 6", 8", 10", 12", 14", 16",... Read more

RHT Hydraulic Separators

Hydraulic Separators Primary/Secondary Piping Simplified RHT Stainless Steel Hydraulic Separators are compact economical units that allow fast and efficient installation of primary/secondary piping for many different boilers. Installing this unique Hydraulic Separator offers the additional advantages of assisting in the removal of unwanted air and dirt particles, preventing their damaging effects on system components. Especially suitable for today's smaller boilers that tend to have a much higher flow resistance. Features Space-saving design Suitable for use with oxygenated water heating systems Blow down port for sediment removal High-quality, industry-standard automatic air vent 304 Stainless Steel body 1¼" Male NPT connections 21... Read more

RHT Tankless Water Heater Valve Set

RHT Tankless Water Heater Valve Set RHT Tankless Water Heater Valves Simplify installation, maintenance & operation RHT Series LFTWH Tankless Water Heater Valves are designed to simplify the installation, maintenance and operation of tankless water heaters. They replace up to 18 fittings and 16 connections used in typical tankless water heater installations. Features: Lead Free copper silicon alloy body FPT unions for connection to water heater Union with FPT and sweat tailpieces for connection to water lines Full-port, quarter-turn ball valve with color-coded tee handle and union Quarter-turn purge and drain valve with hose connection and tethered brass cap Staggered connection points for ease of installation... Read more
Image Unavailable

RHT Mixing Valve Panel

RHT Mixing Valve Panel Easily add a low-temp mix to any high-temp system RHT Mixing valve panel. Designed for quick addition of a low temp zone, includes Tekmar Single Zone Switching Relay, Grundfos Alpha 2 pump, 3-way mixing valve and isolation valves all mounted to a aluminum panel.... Read more

RHT Pro-Press & Push-Fit Valves

RHT Pro-Press and Push-Fit Valves High Quality Pump Flanges and Lead Free Ball Valves Push-Fit Ball Valve compatible with PEX, Copper, and CPVC Press Ball Valves with or without Hose Drain Press Pump Flanges Press x MIP Ball Valves with Butterfly Handle... Read more

RHT OMEGA Heat Transfer Plates

RHT OMEGA Heat Transfer Plates An efficient method to distribute radiant heat from PEX tubing. RHT OMEGA Heat Transfer Plates offer an efficient method of distributing radiant heat from PEX tubing. Made in America from a mill finish aluminum. The channel is a wrap around omega shape (Ω) for a snug fit that holds the tubing in place very effectively in above floor systems such as the RHT Floor Panel System. Features: Available for 3/8" or 1/2" PEX tubing. Single channel plates 5" width .019" thickness Double channel plates 12.5" width .024" thickness 24" or 48" lengths... Read more

RHT HF High Flow Manifolds

RHT HF Manifolds Nickel-Plated Bronze Manifolds Clearance manifolds limited to stock on hand.For our current Stainless Steel manifold, click here. These manifolds are sold in pairs with both supply and return for closed loop, low pressure, non-potable hydronic heating systems with a maximum working temperature of 160° F Included: 1" NPT Straight (180°) Supply & Return Ball Valves w/Temp Gauges 1/2" PEX A, B or C adapters 1" (ID) Nickel-plated Bronze Extrusion Supply & Return pair Manual Air Vent and Boiler Drain on both Supply & Return Valve Control on Supply Wall-mounting brackets Available Options - sold separately: 1" NPT... Read more

RHT Pressure Test Kits

RHT PEX Pressure Test Kit Test your PEX with air pressure Our RHT pressure test kits come in many different configurations. Each has an RHT pressure gauge and a ¾" MNPT x ½" SharkBite connector. Also included is a SharkBite PEX x end stop plug and straight PEX x PEX connectors. Once your PEX is in place, all lines can be connected together as one long loop with the gauge on one end and the end cap at the other end, allowing you to pressure-up your system for inspection.... Read more

RHT Prefabricated Titan Pump Panel

RHT Titan Pump Panels Choose the appropriate customized panel for your application Professionally manufactured, pre-assembled hydronic heating pump panels value-engineered to simplify your radiant heat installation. Customized pump panels save time on the job by reducing on-site work to connecting the supply and return lines to manifolds, basic electrical wiring, and hooking up the make-up water supply. BlueRidge Company technicians are ready to assist you with a total system design whether it is for one room, whole house, warehouse/workshop, condominium or commercial building. Call us at 866-361-4782 for a quote. Compatibility: LAARS Mascot LX (click here to view models and... Read more

RHT PEX Tubing Cutter for Quick & Clean Cuts

RHT PEX Cutter Quick and clean cuts for all types of polyethylene tubing... Read more

RHT Hydronic Fill & Purge System

RHT Hydronic Fill & Purge System Affordable fluid management for radiant heating systems The RHT Hydronic Fill and Purge System meets a relatively high head pressure and flow rate (as shown in the figure below) for filling and purging air from hydronic systems. This is a great option for systems running glycol, or for any closed loop system that cannot be connected to a permanent domestic water supply. With the removeable 4" fill port fluids can be mixed in the 7 gallon container and pumped directly into a hydronic system. Return fluid can be directed back into the 7 gallon... Read more

RHT Foam Stapler and Staples

RHT Foam Stapler Attaches PEX Tubing to Foam Underlayment Upright walking stick (no bending over) Securely holds PEX Pipe to 1 or 2 inch foam RHT staples are also compatible with Roth Tool... Read more

RHT Manifold Accessories

RHT Manifold Accessories Everything you need to get your manifold up and running. RHT 4-wire Thermostatic Circuit Actuators RHT Manifold PEX adapters for all sizes of PEX tubing Optional Flow Gauge adds on to RHT SS-HF Manifold Reducer bushings Ball Valves in straight (180°) or right angle (90°) Sub-Zoning with RHT Actuators and Tekmar Controls: RHT-Tekmar-Sub-zoning.pdf Sub-Zoning with RHT Actuators and Taco Controls: RHT_SubZoning_Diagram.pdf... Read more

Contact

Toll Free: (866) 361-4782

Fax: 206-274-1501

17420 Vashon Hwy SW
PO Box 2270
Vashon, WA 98070

Copyright © 2024 BlueRidgeCompany.com All rights reserved.