Free Shipping on orders over $300. Some exceptions apply 1-866-361-4782

Taco 00e Series 0034e High Efficiency Circulators

Taco 0034e™ ECM High-EfficiencyCirculator Pumps The 0034e™ is a high-performance, variable speed, wet-rotor circulator with high-efficiency ECM permanent magnet technology. With 5 easy settings, its variable speed performance curves are equivalent to the Taco 009, 0010, 0011, 0012, 0012 3-Speed, 0013, 0013 3-Speed & 0014. Ideal for large residential and light commercial hydronic heating, chilled water cooling and domestic hot water systems. The 0034e reduces power consumption by up to 85% compared to equivalent AC permanent split capacitor circulators. With a maximum of 34 feet of head and 50 gpm, it is available in either Cast Iron or NSF certified... Read more

Webstone Valves

Webstone Valves High Quality Valves, Flanges, and Drains Pro-Pal Series valves reduce leak paths and save space & labor Primary/Secondary loop forged brass purge tees Purge & fill valves allow simultaneous draining, flushing and refilling of a hydronic system Full port forged brass ball valves with or without Hi-Flow Hose Drains Flanges with or without Hi-Flow Hose Drains Brass boiler drains... Read more

Taco 00e Series 007e High Efficiency Circulator

Taco 007e ECM High-Efficiency Circulator Taco 007e is a high-efficiency wet rotor circulator with an ECM permanent magnet motor. The 007e is everything you love about the 007. It is ideal for hydronic systems zoned with circulators or zone valves. The 007e delivers the performance equivalent of the 007 plus the reliability and easy installation that made the 00® famous. Install it, forget it.™ Features: ECM performance equivalent to the legendary 007 circulator High-efficiency ECM motor uses up to 85% less electricity Ideal for hydronic systems zoned with circulators or zone valves BIO Barrier® protects pump from system contaminants SureStart... Read more

Taco 0015e3 High Efficiency 3 Speed Circulator

Taco 0015e3 High Efficiency 3 Speed Circulator Taco 0015e3™ is a variable speed, high-efficiency wet rotor circulator with an ECM permanent magnet motor. It's ideal for hydronic systems zoned with circulators or zone valves. With 3 easy settings, the 0015e3 delivers performance, reliability and ease of installation that made the 00® famous. Install it, forget it!™ Features: BIO Barrier® protects the pump from system contaminants SureStart™ automatic unblocking and air purging mode High-efficiency ECM motor uses up to 85% less electricity IFC® (Integral Flow Check) is included 3 easy settings: LOW (5 ft. head), MEDIUM (10 ft. head), HIGH (18... Read more

Taco 00e Series VT2218 High Efficiency Circulator

Taco 00e Series VT2218 High Efficiency Delta-T Circulator Pump The only temperature sensing pump in its class The 00e Series VT2218 circulator is a temperature sensing, self-adjusting, variable speed wet rotor circulator with an ECM permanent magnet motor. Operating modes include Delta-T differential temperature, 4 fixed speeds, set point heat, set point cool and boiler protection. Features: Delta-T operation maximizes system efficiency and comfort High-efficiency ECM motor uses up to 85% less electricity Can save hundreds in fuel costs LCD displays operating mode,temperature or speed setting, watts, supply & return temperatures Easy to program and install Sure Start automatic unblocking... Read more

Taco 00e Series VR15-VR30 Viridian Pumps

Taco 00e Series Viridian Pumps A convergence of efficiency, simplicity and technology within this new generation of wet rotor circulators. The 00e (VR15 - VR30) are versatile web-enabled, wet rotor, variable speed line of commercial pumps for chilled and hot water applications. Internet access and settings make installation, setup and service easy. The ECM motor saves up to 85% of the electrical energy compared to conventional pumps. Multiple operating modes make this pump a perfect choice for most applications. Available in four sizes (VR 15-3, 20-3, 25-3 and 30-3), the sensorless 00e VR line provides differential head pressures up to... Read more

Taco 006e SmartPlus-e ECM Instant Hot Water System

Taco 006e3™ ECM High-Efficiency Hot Water Circulation PumpThe 006e3 perfect for any instant hot water system The 00e Series® — 006e3 is an infinitely variable fixed speed, high-efficiency wet rotor circulator with an ECM permanent magnet motor. It is perfect for hot water recirculation and hydronic heating applications. With 3 easy settings, the 006e3 delivers performance, reliability and ease of installation that made the 00® famous Features: Quick & easy installation Optional SmartPlus-e controller plug learns hot water usage patterns Optional Hot Link Valve retrofits with no additional hard plumbing High-efficiency ECM motor uses up to 85% less electricity SureStart®... Read more

Taco 00e Series VR3452 High Efficiency Circulator

Taco VR3452 ECM High-Efficiency Circulator Taco 00e™ series VR3452 circulator is a self-adjusting, high-efficiency wet rotor circulator for chilled and hot water applications. All settings can be accomplished on the user-friendly interface. The ECM permanent magnet motor saves up to 85% of the electrical energy compared to conventional pumps. Features: High-efficiency ECM motor uses up to 85% less electricity LED displays watts, flow & RPM Compact size for easy handling and installation Plug & play simplicity Robust construction for long life Industry standard flange configuration and lay length Low noise operation Cataphoresis coated volute Communication module (Standard on -FC1A01 models)... Read more

Taco 00 Series Cartridge Circulators

Taco 00 Series Cartridge Circulators Complete line of water circulation pumps From the compact, low flow 003 to the high-head 0013, there's a Taco Circulator to fit your residential or light commercial application. Installation is quick and easy, and maintenance is a snap. With no mechanical seal, the self-lubricating design provides unmatched reliability. Every 00® pump features a field-replaceable cartridge that contains all the moving parts. IFC® Cartridge Circulators feature an Integral Flow Check, eliminating additional installation costs associated with separate in-line flow checks. The IFC® also improves system performance and is easy to maintain. Taco's 00® circulators are ideal... Read more

Taco 00e Series 0018e High Efficiency Circulator

Taco 00e Series Infinitely Variable Speed Circulator Pump Efficiency Uncomplicated 0018e3-2F2 Taco Cast Iron ECM High Efficiency Circulator Bluetooth, Two Bolt Flange. The 00e® series - Taco 0018e featuring Bluetooth is a versatile, variable speed, high-efficiency wet rotor circulator with an ECM permanent magnet motor. Download the Taco 0018e Mobile App to see and control real-time system performance. Run system operation & validation reports including performance diagnostics & history. Know the most efficient setting based on real-time feedback and alleviate the problems of over-pumping. You design systems with precision. The 0018e offers the performance & control to match. Features: High-efficiency... Read more

Taco Shut-Off Freedom Swivel-Flanges

Taco Shut-Off Freedom Swivel-Flanges Make quick work of pump installation & maintenance Taco Shut-Off Swivel-Flange® sets combine a full-port ball valve and companion flange to isolate system circulators for easy removal and service without draining the system. Simplify your next 00® circulator installation while saving material and labor costs. Solid brass uni-body construction, available in ½" - 1½" NPT or Sweat connections. The Swivel-Flange allows easier installation and convenient positioning of the pump and lever handle. Features Easy 1/4 turn open/close operation Positive shut-off, leak-free design Swivel flange allows 360° rotation Solid brass construction Chrome/brass valve ball High-quality Teflon seats... Read more

B&G Isolation Flanges

B&G Isolation Flanges Isolation ball valve combined with a companion flange The isolation flange is a combination of an isolation ball valve and a companion flange for circulators. The isolation flange allows easy service or replacement of the circulator without the need to drain the system. The isolation flange fits the Bell & Gossett NRF/NBF/SSF wet rotors, Series PL, Series 100, HV, PR and LR circulators.... Read more

B&G Check-Trol Isolation Flow Control Flange

B&G Check-Trol™ Isolation Flow Control Flange The Check-Trol flange is a combination isolation valve, flow control valve and companion flange for circulators. The ball valve allows the circulator to be removed from the system without draining the system. The internal spring check prevents gravity circulation. Free floating companion flange makes pump installation a snap.... Read more

Taco Replacement Parts & Accessories

Taco Replacement Parts & Accessories Replaceable Cartridges & Other Parts... Read more

Taco Zone Sentry Zone Valve

Taco Zone Sentry Zone Valves specifically designed for use in heating systems. The Taco Zone Sentry® is the most technologically advanced zone valve ever made. It's also simple to install and operate. The valve can be installed in any direction, in any orientation. The Taco Zone Sentry® Zone Valve enhances the overall performance of any zone valve system. The unique patented technology in the Zone Sentry® utilizes a microcircuit-based logic to control a gear-driven electronic actuator which drives a ball valve-based body design. All this adds up to a zone valve that leads the industry in energy efficiency, flow capacity... Read more

Grundfos ALPHA Circulator

Grundfos ALPHA Circulator The next generation of circulators The Grundfos ALPHA will change the way you view circulators. With its permanent magnet motor design, this energy efficient circulator reduces power consumption by 50% or more. The unique patented AUTOadapt™ feature controls pump performance automatically within defined performance range, ensuring lowest possible energy consumption without sacrificing comfort. Features: Choice of line cord or terminal box for conduit connection Large display shows current energy consumption in Watts and estimated flow in GPM One button, easy-to-use interface Compact design Flow Range: 0-21 GPM Head Range: 0-19 Feet Max. Working Pressure: 150 PSI PDF... Read more

Grundfos MAGNA1 Circulators

Grundfos MAGNA1 Circulators High efficiency made simple The MAGNA1 is a cost-efficient yet high-performing circulator designed for circulating liquids in heating, cooling, domestic hot water, geothermal and solar systems. The reliable MAGNA1 complies with the strict EuP requirements but features only what is important for its core function. This makes the MAGNA1 pump the perfect solution in a refurbishment situation. Features & Benefits: Simple installation Low energy consumption Proportional-pressure control Constant-pressure control Constant-curve, constant-speed duty Nine possible pump settings Low noise level Minimal maintenance and long life... Read more

Grundfos MAGNA3 Circulators

Grundfos MAGNA3 Circulators Best efficiency in its class The MAGNA3 is an innovative member of the Grundfos family of high-quality circulator pumps designed for circulating liquids in heating, cooling, domestic hot water and solar heating systems. With a MAGNA3, you can stop worrying about complicated pump settings. Simply install the pump and leave it on the AUTOADAPT factory setting. The MAGNA3 will automatically analyse the heating system, find the optimum setting and then continuously adjust its operation to changes in demand. The result is optimum comfort and minimum energy consumption. In addition, MAGNA3 pumps are extremely flexible and reliable, and... Read more

Taco X-Pump Block

Taco Pumps  X-Pump Block XPB-1 Open system vs. closed? Barrier vs non-barrier tubing? Boiler vs. water heater? The debate ends here. The Taco X-Pump Block™ (XPB) delivers unmatched flexibility in a single unit. It is equally effective when used with open or closed systems, barrier or non-barrier tubing and where the system heat source is a boiler or water heater. The Taco X-Pump Block™ combines a variable speed mixing control, a heat source circulator, system circulator and heat exchanger in a single unit. This combination delivers complete system isolation between the heat generation side of the system and the heat... Read more

Grundfos UP-ZV Zone Valves

Grundfos UP-ZV Motorized Zone Valves For hydronic heating or chilled water applications Grundfos UP Zone Valves incorporate 24-VAC normally closed motorized actuator design with or without sealed end switch. All components are corrosion resistant. The high gear ratio transmission eliminates gear tooth stress, water hammer issues, and valve "bouncing" during closing. Forged brass body is 2-way flow with high CV rating and incorporates a durable stainless steel/EPDM valve stem assembly. Features: In-line removable actuator for ease of installation and service Manual open/close lever Sealed end switch Silent close-off technology High gear ratio Forged brass body Removable service cap High Cv... Read more

Taco 2-way & 3-way Heat Motor Zone Valves

Taco Motor Zone Valves 2-way & 3-way Heat Motor Zone Valves Taco Heat Motor Zone Valves provide a convenient way to create individual zones or equipment isolation in a hydronic heating system. Utilizing one pump along with multiple zone valves, flow can be started, stopped or diverted through the system to provide individual room or area comfort control and energy savings. The Gold Series is the industry standard for hydronic heating applications. The quiet and dependable operation has made this valve an industry leader for decades. The manual open lever and twist off head makes installation and service easy. Available... Read more

Grundfos Dielectric Isolation Valve Sets

Grundfos Dielectric Isolation Valve Sets Eliminate dissimilar metal corrosion Quick installation Full port shut-off ball valve Service pump without draining system Swivel flange allows optimum pump mounting position All hardware included... Read more

Taco i-Series Mixing Valve

Taco Mixing Valve i-Series Mixing Valve Taco iSeries Mixing Valves are a breakthrough in precision, cost effective temperature control for heating systems. The iSeries valves are available in two versions, providing either outdoor reset control or fixed water supply temperature by modulating the position of a 2-way, 3-way or a 4-way valve. Additionally, iSeries valves protect the boiler against flue gas condensation. A microprocessor-based control is built into the valve actuator, to which all wiring connections are made. All-in-one iSeries Mixing Valves deliver optimum zone-by-zone temperature control, with built-in boiler protection (you will need to order the optional boiler protection... Read more

Taco Genie

TacoGenie Save water, energy and money Have hot water at your fingertips whenever you turn the faucet. Stop wasting water as you wait for cold to turn to hot. The TacoGenie™ is a small, silent pump attached to your hot and cold water lines in the cabinet under your most remote kitchen or bath fixture. When the TacoGenie™ is activated, the cool water you normally let run down the drain is circulated back to the water heater through the cold water line. Instantly the pump circulates hot water from the water heater, and returns the cooled water back through the... Read more

Grundfos UP and UPS Circulators

Grundfos UP and UPS Circulators Long life, low noise The UP(S) pumps can be used in both open and closed systems. Pumps are of the canned-rotor type, i.e. pump and motor form an integral unit without a shaft seal and with only two gaskets for sealing. The bearings are lubricated by the pumped liquid. UP(S) pumps are designed for circulation of liquids in heating and air-conditioning systems. Pumps with bronze or stainless steel housings are also suitable for use in hot-water service systems. Features & Benefits: Maintenance free Low noise Low energy Complete range of sizes and options.... Read more


Toll Free: (866) 361-4782

Fax: 206-274-1501

17420 Vashon Hwy SW
PO Box 2270
Vashon, WA 98070

Copyright © 2016 All rights reserved.