| 1 |
|
|
B&G Submersible Sump Pumps
B&G Submersible Sump Pumps Engineered for life Features: Corrosion-resistant construction Motor protected by a mechanical seal consisting of ceramic/silicon carbide seal faces with BUNA elastomers Glass-filled thermoplastic impeller & motor cover Upper & lower heavy duty ball bearing construction Air-filled motor mounted in aluminum housing Permanently lubricated motor for extended service life and powered for continuous operation Includes vertical float switch and mounting pipe - adjustable for various liquid levels Lightweight, portable and easy to service Specifications: Discharge size: 1-1/2" NPT Capacities: to 38 GPM Maximum head: 25 feet TDH Max. solids: 3/16" spherical Max. liquid temperature: 104°F (40°C) Motor:... 
|
|
| 2 |
|
|
B&G Enhanced Air Separator
B&G EAS Enhanced Air Separator Patented, innovative design Bell & Gossett's Model EAS Enhanced Air Separator is a patented, innovative design in air separators. It has been engineered to remove entrained air from hydronic heating and cooling systems, providing far superior air removal compared with other devices available today. The EAS is ideal for residential, institutional and light commercial applications....
|
|
| 3 |
|
|
B&G EASB-Jr Enhanced Air Separator
B&G EASB-Jr Enhanced Air Separator Automatically removes entrained air bubbles in hydronic systems Bell & Gossett's Model EASB-Jr Enhanced Air Separator automatically removes entrained air bubbles in hydronic systems. As fluid enters the EASB-Jr, the velocity is decreased creating a low pressure area. The small bubbles are released from fluid and then collected on the coalescing medium. As the bubbles coalesce, they rise to the top of the air separator where they are released to atmosphere through the built-in automatic air vent. The air separator has a bottom 1/2"NPT connection to accommodate a B&G diaphragm expansion tank. The compact design...
|
|
| 4 |
|
|
B&G Inline Air Separator
B&G Inline Air Separator Efficiently separate air The B&G In-Line Air Separator is specifically designed to efficiently separate air from circulating water in hydronic heating and cooling systems to assure quiet operation....
|
|
| 5 |
|
|
B&G Series PT Potable Expansion Tanks
B&G PT Potable Expansion tanks Absorb the forces of expanding potable water The Series "PT" tank is designed to absorb the forces of expanding water and protect the domestic water system from pressure build up. The FDA approved heavy duty butyl diaphragm and polypropylene liner completely isolate the water from the shell. Due to oversize shipping and fuel surcharges, our shipping calculations may need to be adjusted after you order. Call 866-361-4782 if you require a more accurate shipping quote....
|
|
| 6 |
|
|
B&G Series HFT Hydronic Heating Expansion Tanks
B&G HFT Heating Expansion Tanks Absorb the forces of expanding water The Series "HFT" tank is designed to absorb the force of thermal expansion when heating water and to maintain proper pressurization in a closed hydronic system. The heavy-duty butyl diaphragm separates system water from the air in the tank thereby preventing waterlogging problems. Due to oversize shipping and fuel surcharges, our shipping calculations may need to be adjusted after you order. Call 866-361-4782 if you require a more accurate shipping quote....
|
|
| 7 |
|
|
B&G Ecocirc Speed-Controlled Heating Circulators
B&G Ecocirc Speed-Controlled Heating Circulators The ecocirc® is setting new standards! User-friendly, speed controlled heating circulator with energy efficient spherical motor technology. - Control Modes auto: The ecocirc® auto has a proportional pressure control, which automatically adjusts the pump performance continuously and automatically to the requirements of the heating system. When the zone or thermostatic valve closes, the pump performance is reduced to save energy and to avoid velocity noise in the system. vario: The ecocirc® vario allows for step-less speed control to set the pump performance to meet individual system requirements. - Application The ecocirc® auto and vario circulators...
|
|
| 8 |
|
|
B&G Ecocirc Lead-Free Potable Circulators
B&G Ecocirc Domestic Water Ciruclators Lead Free Circulators autocirc Highly efficient ECM technology Long lasting, silent operation Saves thousands of gallons of water Resistant to scale build up No shaft, no seal Maintenance free without blockage Single bearing design ecocirc e3 Easy installation Programmable timer and built-in thermostat available to further reduce energy consumption. Available with integrated check and ball valves for quick isolation during service.Instant availability of hot water, even at the tap farthest from the hot water heater. Conserves natural resources - reduced power consumption, CO2 emissions and wasted water. Documentation: autocirc® series | ecocirc® e3 series...
|
|
| 9 |
|
|
B&G Red Fox Cast Iron Wet Rotor
B&G Red Fox Circulators System Lubricated Iron Body Circulators High starting torque for dependable seasonal start-ups (Up to 80% more than competing circulators) Unique B&G DuraGlide Bearing System assures years of trouble-free start-ups Closed impeller design improves operating efficiency Backed by B&G's representatives and a 3-year warranty--the best in the business DuraGlide Bearing System incorporates several components working together to eliminate seasonal freeze-up Stabilized, heat resistant polypropylene impeller, its closed design improves operating efficiency Self-cleaning particle shield protects the shaft and bearings from system start-up debris One-piece, high-nickel stainless steel stator can isolates the stator from system fluid and maintains...
|
|
| 10 |
|
|
B&G Stainless Steel Circulator for Potable Water
B&G Stainless Steel Maintenance-Free Circulators Maintenance-free, stainless steel pump body. Flanged, union or sweat models available. High starting torque provides dependable start-ups. Unique B&G DuraGlide Bearing System assures whisper-quiet, maintenance-free operation Standard, universal flange-to-flange dimensions Backed by B&G representatives and a 3-year warranty--the best in the business DuraGlide Bearing System incorporates several components working together to eliminate seasonal freeze-up Low-watt, energy-conserving models Flanged and union system connection models are available B&G NBF/SS Pump Curves Chart B&G Isolation Flanges B&G Check-Trol Check Valve Isolation Flanges...
|
|
| 11 |
|
|
B&G Bronze Fox Wet Rotor Circulators
B&G Bronze Fox Circulators 100% Lead-free Circulators A series of in-line wet rotor circulation pumps designed specifically for quiet operation in open (potable) water systems. These pumps have 100% lead-free bronze bodies. Flanged (F) (default), union (U) or 1/2" sweat (S) models are available. B&G NBF/SS Pump Curves Chart B&G Half Unions B&G Isolation Flanges B&G Check-Trol Check Valve Isolation Flanges...
|
|
| 12 |
|
|
B&G PL Series Dry Rotor Circulators
B&G PL Series Superior alternative to large wet rotor B&G powerful, dry-motor design delivers exceptional performance 25% more efficient than competition Precision-machined and balanced alloy steel rotor for superior performance. Solid "Stiff-Shaft" design is constructed of high-strength alloy steel impervious to cracking caused by thermal stresses. XL-11 Precision-Crafted Bearing System Permanently oil lubricated Completely maintenance free Advanced close-coupled design increases pump life and efficiency, assures dependable seasonal start-ups and can easily handle difficult water conditions Tough, durable seal system features a carbon/silicon carbide seal on a stainless steel shaft sleeve for long life and rugged operation Double sided stainless steel...
|
|
| 13 |
|
|
B&G LR Series Oil Rotor Circulator
B&G LR Series Oil Rotor Circulators The Series LR is a flanged in-line system lubricated circulating pump designed specifically for quiet operation in closed loop systems. The Series LR is available in cast iron body construction for hydronic heating systems or bronze body construction for potable water applications. B&G LR Pump Curves Chart B&G Isolation Flanges B&G Check-Trol Check Valve Isolation Flanges...
|
|
| 14 |
|
|
B&G Isolation Flanges
B&G Isolation Flanges Isolation ball valve combined with a companion flange The isolation flange is a combination of an isolation ball valve and a companion flange for circulators. The isolation flange allows easy service or replacement of the circulator without the need to drain the system. The isolation flange fits the Bell & Gossett NRF/NBF/SSF wet rotors, Series PL, Series 100, HV, PR and LR circulators....
|
|
| 15 |
|
|
B&G Check-Trol Isolation Flow Control Flange
B&G Check-Trol™ Isolation Flow Control Flange The Check-Trol flange is a combination isolation valve, flow control valve and companion flange for circulators. The ball valve allows the circulator to be removed from the system without draining the system. The internal spring check prevents gravity circulation. Free floating companion flange makes pump installation a snap....
|
|
| 16 |
|
|
B&G Unions & Accessories
B&G Unions & Accessories Timers, Aquastat, etc. The TC-1 timer control kit can be installed for use on any B&G NBF circulator The AQS aquastat is designed to thermostatically turn any B&G NBF circulator ON at 100F and OFF at 120F The Thermoflo balancer installed in each circuit or zone allows the entire system to be quickly balanced....
|
|
| 17 |
|
|
B&G AZ Snap-on Pump Relay
B&G AZ Snap-on Pump Relay AZ quickly attaches to any B&G wet rotor circulator. Snap-on design allows the AZ to be quickly attached to any B&G wet rotor circulator, reducing your inventory investment (no need to carry ″special″ circulators with factory mounted controllers) Clearly marked terminals make for sure, fast wiring of the system Compact design fits in tight locations and presents a clean professional appearance 100% factory tested assures reliable operation 5 year warranty − the best in the industry Daisy-Chain the AZ relays to form up to three zones Can be used on any B&G model NRF, NBF,...
|
|
| 18 |
|
|
B&G Comfort-Trol Zone Control Valve
B&G Comfort-Trol Zone Control Valve Designed to meet the most demanding requirements. Comfort-Trol Zone Control Valve is specially designed to meet the most demanding requirements of residential, institutional and commercial hydronic heating and cooling systems. Silent-running heat motor saves power via intermittent energizing. Unique double torsion spring opens and closes smoothly, prevents water hammering, assures positive shut-off. Leaf-type stack switch with blade terminals allow fast installation and no soldering. Compact design and ultra-quiet operation is ideal for installation under baseboards or wherever space is limited. Available in 3/4 inch sweat body connections. Maximum working pressure 125 psig. Fluid temperature range...
|
|
| 19 |
|
|
B&G Copper Red Ring Monoflo Fittings
B&G Monoflo Fittings A single pipe serves as both supply and return. Connect risers to the main, assuring proper diversion of water to each heating unit regardless of type and its position in the system. Recommended for most installations including cast iron non-ferrous baseboards, free-standing radiation or convectors. Only one fitting is needed for most installations for adequate diversion for upfeed radiation. For most applications, a second fitting can be used if higher resistance is required....
|
|
| 20 |
|
|
B&G Circuit Setter Plus
B&G Circuit Setter Plus Calibrated Balance Valve The Bell & Gossett CIRCUIT SETTER PLUS calibrated balance valve is a precision machined ball type triple purpose balancing instrument. It is precisely calibrated for use as a presettable balance valve, variable orifice flow meter and positive shut-off service valve. Valves are furnished with a calibrated nameplate and memory stop indicator which permits the valve to be preset to a fixed open position and then closed for service without disturbing valve setting. Valves are equipped with capped readout valves fitted with internal check valves and 1/4" NPT tapped and plugged drain port....
|
|
| 21 |
|
|
B&G Circuit Setter
B&G Circuit Setter RF Calibrated Balance Valve The Bell & Gossett CIRCUIT SETTER "RF" calibrated balance valve is a precision machined ball type, triple purpose balancing instrument. It is precisely calibrated for use as a presettable balance valve, variable orifice flow meter and positive shut-off service valve for low flow applications. Valves are furnished with a calibrated nameplate and memory stop indicator. This permits the valve to be preset to a fixed open position and then closed for service without disturbing valve settings. Valves are equipped with capped readout valves fitted with internal check valves, and an NPT tapped and...
|
|
| 22 |
|
|
B&G Differential Bypass Valve
B&G Differential Bypass Valve For hydronic systems utilizing zone valves Controls excess flow in the system when there is reduction in demand Available in 3/4" connection All brass body with non-ferrous internals...
|
|
| 23 |
|
|
B&G Primary-Secondary Header
B&G PSH Primary-Secondary Header The Bell & Gossett PSH is a device which makes the primary and secondary circuits connected to it independent and can be used in hot or chilled water systems. The PSH is supplied with an air-vent and check valve assembly to permit automatic discharge of the air in the circuits. The PSH is also equipped with a drain valve for removing any impurities deposited in the bottom of the unit....
|
|
| 24 |
|
|
B&G Pressure Reducing Valve
B&G Pressure Reducing Valves Fill the system to a preset pressure for optimum performance. Fast fill feature reduces start-up time and labor. Low inlet pressure check valve helps prevent loss of system pressure if the supply water drops below system pressure. Convenient cleanable strainer is designed to prevent dirt and sediment from entering the system. Union connection available with 1/2″ male NPT thread and 1/2″ female sweat tail-piece for fast, flexible system connection. Brass body construction is highly resistant to corrosion -- ideal for water systems....
|
|
| 25 |
|
|
B&G Hydrotrol Flow Control Valves
B&G Hydrotrol Flow Control Valves Prevent overheating due to gravity flow The Hydrotrol (HT) flow control valve is used to prevent overheating of zones due to gravity flow in hydronic heating systems and will permit summer/winter operation of indirect water heater. The HT valve allows fluid to pass when the system or zone pumps start. When the system or zone pumps are not operating, the HT valve remains closed, preventing gravity circulation. The HT valves are designed with a 1/2 turn knob that can be manually opened when draining the system or for bypass purposes. The HT valve can be...
|
|
