1-866-361-4782

Home Documents Contacts Shipment Tracking

RHT Hydraulic Separators

Hydraulic Separators Primary/Secondary Piping Simplified RHT Stainless Steel Hydraulic Separators are compact economical units that allow fast and efficient installation of primary/secondary piping for many different boilers. Installing this unique Hydraulic Separator offers the additional advantages of assisting in the removal of unwanted air and dirt particles, preventing their damaging effects on system components. Especially suitable for today’s smaller boilers that tend to have a much higher flow resistance. Features Space-saving design Suitable for use with oxygenated water heating systems Blow down port for sediment removal High-quality, industry-standard automatic air vent 304 Stainless Steel body 1¼" Male NPT connections 21... Read more

Taco Air Scoops

Taco Air Scoops Air Elimination & Control Taco Air Scoops® are specifically designed with internal baffles that slow the water velocity in order to separate the air from solution. This provides a noiseless, air-free hydronic heating, cooling or combination system. Taco Air Scoops® also provide an economical way to integrate air elimination by the connection of either a plain steel or diaphragm expansion tank. Features: One-piece, cast iron construction 1/8" vent connection on top & 1/2" bottom tapping for expansion tank connection 1-1/2" through 4" Air Scoops have an additional top tapping for the connection of a plain steel expansion... Read more

Taco Vortech Air Separator

Taco VorTech Air Separator Designed to provide an enhanced level of air removal. The Taco VorTech Air Separator is designed to provide an enhanced level of air removal in hydronic heating, cooling or combination systems. Air is quickly and efficiently separated and vented through a factory-installed Taco 3/4" Hy-Vent. Taco's innovative tangential flow pattern, primary separation chamber and standard Taco Hy-Vent make the VorTech the most effective and reliable air separator you can buy. Features Include: Requires No Minimum Run of Pipe Convenient 1/2" Bottom Tapping for Installation of Expansion Tank Cast Iron Body and Cap Stainless Steel Cartridge and... Read more

Taco 4900 Series Air Separator

Taco 4900 Series High Efficiency Air Separators Taco 4900 Series Air Separators are designed for the complete elimination of air from closed loop heating and cooling systems up to a maximum temperature of 240°F and a maximum pressure of 150 psi. The high efficiency Taco 4900 Series Air Separators use patented PALL ring technology to clear the system of microbubbles, sand, dirt and rust that can damage the system, reduce efficiency and cause irritating noise. By applying PALL ring technology to hydronic air and dirt separation, the 4900 Series will: Remove microbubbles as small as 15 microns Eliminate air induced... Read more

B&G EASB-Jr Enhanced Air Separator

B&G EASB-Jr Enhanced Air Separator Automatically removes entrained air bubbles in hydronic systems Bell & Gossett's Model EASB-Jr Enhanced Air Separator automatically removes entrained air bubbles in hydronic systems. As fluid enters the EASB-Jr, the velocity is decreased creating a low pressure area. The small bubbles are released from fluid and then collected on the coalescing medium. As the bubbles coalesce, they rise to the top of the air separator where they are released to atmosphere through the built-in automatic air vent. The air separator has a bottom 1/2"NPT connection to accommodate a B&G diaphragm expansion tank. The compact design... Read more

Taco Automatic Air Vents

Taco Automatic Air Vents The industry standard for more than 30 years. HVAC professionals have recognized Taco Automatic Air Vents as the industry standard for more than 30 years. Attached to the boiler or used through the system, Taco Vents automatically purge unwanted air from any hydronic installation, allowing the system to run more efficiently. Taco Hy-Vents The high-capacity, float-style vent can be placed either on the boiler or at the high points throughout the system. With threaded connections -- 1/8", 1/4", 1/2" and 3/4" -- and operating pressure ratings up to 250 psi, these brass-body, nickel-plated vents meet the... Read more

B&G Inline Air Separator

B&G Inline Air Separator Efficiently separate air The B&G In-Line Air Separator is specifically designed to efficiently separate air from circulating water in hydronic heating and cooling systems to assure quiet operation.... Read more

B&G Enhanced Air Separator

B&G EAS Enhanced Air Separator Patented, innovative design Bell & Gossett's Model EAS Enhanced Air Separator is a patented, innovative design in air separators. It has been engineered to remove entrained air from hydronic heating and cooling systems, providing far superior air removal compared with other devices available today. The EAS is ideal for residential, institutional and light commercial applications.... Read more

Copyright © 2016 BlueRidgeCompany.com
All rights reserved.