1-866-361-4782

Home Documents Contacts Shipment Tracking

B&G Flanges for Large Pumps

B&G Flanges for Large Pumps Flanges for Bell & Gossett HV, PL-45, PL-50 or NRF-45 iron pumps. Also lead-free flanges for Bell & Gossett HV, PL-45B, PL-50B or NBF-45 bronze or stainless steel pumps.... Read more

B&G Ecocirc Speed-Controlled Heating Circulators

B&G Ecocirc Speed-Controlled Heating Circulators The ecocirc® is setting new standards! User-friendly, speed controlled heating circulator with energy efficient spherical motor technology. The perfect balance of reliability, efficiency & simplicity. - Control Modes auto: The ecocirc® auto has a proportional pressure control, which automatically adjusts the pump performance continuously and automatically to the requirements of the heating system. When the zone or thermostatic valve closes, the pump performance is reduced to save energy and to avoid velocity noise in the system. vario: The ecocirc® vario allows for step-less speed control to set the pump performance to meet individual system requirements.... Read more

B&G Ecocirc Lead-Free Potable Circulators

B&G Ecocirc Domestic Water Ciruclators Lead Free Circulators autocirc Highly efficient ECM technology Long lasting, silent operation Saves thousands of gallons of water Resistant to scale build up No shaft, no seal Maintenance free without blockage Single bearing design ecocirc e3 Easy installation Programmable timer and built-in thermostat available to further reduce energy consumption. Available with integrated check and ball valves for quick isolation during service.Instant availability of hot water, even at the tap farthest from the hot water heater. Conserves natural resources - reduced power consumption, CO2 emissions and wasted water. Documentation: autocirc® series | ecocirc® e3 series... Read more

B&G Ecocirc Solar Circulators

B&G Ecocirc Solar Circulators The ecocirc solar pump can be used for most circulation pump applications without connection to the power grid. Instead, the solar pump can be directly connected to the photovoltaic panel. This pump is perfect for single family home thermal solar systems or any circulation pump application where conventional power is not available. Features: Runs on DC power for direct connection to photovoltaic panels Low energy consumption: Start-up power requires less than 1 watt Adjustable voltage settings or "Auto" mode for easy use Equipped with an integrated over-temperature safety device Built in optimization (MPP) program to track... Read more

B&G Red Fox Cast Iron Wet Rotor

B&G Red Fox Circulators System Lubricated Iron Body Circulators High starting torque for dependable seasonal start-ups (Up to 80% more than competing circulators) Unique B&G DuraGlide Bearing System assures years of trouble-free start-ups Closed impeller design improves operating efficiency Backed by B&G's representatives and a 3-year warranty--the best in the business DuraGlide Bearing System incorporates several components working together to eliminate seasonal freeze-up Stabilized, heat resistant polypropylene impeller, its closed design improves operating efficiency Self-cleaning particle shield protects the shaft and bearings from system start-up debris One-piece, high-nickel stainless steel stator can isolates the stator from system fluid and maintains... Read more

B&G Stainless Steel Circulator for Potable Water

B&G Stainless Steel Maintenance-Free Circulators Maintenance-free, stainless steel pump body. Flanged, union or sweat models available. High starting torque provides dependable start-ups. Unique B&G DuraGlide Bearing System assures whisper-quiet, maintenance-free operation Standard, universal flange-to-flange dimensions Backed by B&G representatives and a 3-year warranty--the best in the business DuraGlide Bearing System incorporates several components working together to eliminate seasonal freeze-up Low-watt, energy-conserving models Flanged and union system connection models are available B&G NBF/SS Pump Curves Chart B&G Isolation Flanges B&G Check-Trol Check Valve Isolation Flanges... Read more

B&G Bronze Fox Wet Rotor Circulators

B&G Bronze Fox Circulators 100% Lead-free Circulators A series of in-line wet rotor circulation pumps designed specifically for quiet operation in open (potable) water systems. These pumps have 100% lead-free bronze bodies. Flanged (F) (default), union (U) or 1/2" sweat (S) models are available. B&G NBF/SS Pump Curves Chart B&G Half Unions B&G Isolation Flanges B&G Check-Trol Check Valve Isolation Flanges... Read more

B&G PL Series Dry Rotor Circulators

B&G PL Series Superior alternative to large wet rotor B&G powerful, dry-motor design delivers exceptional performance 25% more efficient than competition Precision-machined and balanced alloy steel rotor for superior performance. Solid "Stiff-Shaft" design is constructed of high-strength alloy steel impervious to cracking caused by thermal stresses. XL-11 Precision-Crafted Bearing System Permanently oil lubricated Completely maintenance free Advanced close-coupled design increases pump life and efficiency, assures dependable seasonal start-ups and can easily handle difficult water conditions Tough, durable seal system features a carbon/silicon carbide seal on a stainless steel shaft sleeve for long life and rugged operation Double sided stainless steel... Read more

B&G LR Series Oil Rotor Circulator

B&G LR Series Oil Rotor Circulators The Series LR is a flanged in-line system lubricated circulating pump designed specifically for quiet operation in closed loop systems. The Series LR is available in cast iron body construction for hydronic heating systems or bronze body construction for potable water applications. B&G Isolation Flanges B&G Check-Trol Check Valve Isolation Flanges... Read more

B&G AZ Snap-on Pump Relay

B&G AZ Snap-on Pump Relay AZ quickly attaches to any B&G wet rotor circulator. Snap-on design allows the AZ to be quickly attached to any B&G wet rotor circulator, reducing your inventory investment (no need to carry ″special″ circulators with factory mounted controllers) Clearly marked terminals make for sure, fast wiring of the system Compact design fits in tight locations and presents a clean professional appearance 100% factory tested assures reliable operation 5 year warranty − the best in the industry Daisy-Chain the AZ relays to form up to three zones Can be used on any B&G model NRF, NBF,... Read more

B&G Isolation Flanges

B&G Isolation Flanges Isolation ball valve combined with a companion flange The isolation flange is a combination of an isolation ball valve and a companion flange for circulators. The isolation flange allows easy service or replacement of the circulator without the need to drain the system. The isolation flange fits the Bell & Gossett NRF/NBF/SSF wet rotors, Series PL, Series 100, HV, PR and LR circulators.... Read more

B&G Check-Trol Isolation Flow Control Flange

B&G Check-Trol™ Isolation Flow Control Flange The Check-Trol flange is a combination isolation valve, flow control valve and companion flange for circulators. The ball valve allows the circulator to be removed from the system without draining the system. The internal spring check prevents gravity circulation. Free floating companion flange makes pump installation a snap.... Read more

B&G Unions & Accessories

B&G Unions & Accessories Timers, Aquastat, etc. The TC-1 timer control kit can be installed for use on any B&G NBF circulator The AQS aquastat is designed to thermostatically turn any B&G NBF circulator ON at 100F and OFF at 120F... Read more

Copyright © 2016 BlueRidgeCompany.com
All rights reserved.