Free Shipping on orders over $300. Some exceptions apply 1-866-361-4782

Taco 00e Series 007e High Efficiency Circulator

Taco 007e ECM High-Efficiency Circulator Taco 007e is a high-efficiency wet rotor circulator with an ECM permanent magnet motor. The 007e is everything you love about the 007. It is ideal for hydronic systems zoned with circulators or zone valves. The 007e delivers the performance equivalent of the 007 plus the reliability and easy installation that made the 00® famous. Install it, forget it.™ Features: ECM performance equivalent to the legendary 007 circulator High-efficiency ECM motor uses up to 85% less electricity Ideal for hydronic systems zoned with circulators or zone valves BIO Barrier® protects pump from system contaminants SureStart... Read more

Taco 0015e3 High Efficiency 3 Speed Circulator

Taco 0015e3 High Efficiency 3 Speed Circulator Taco 0015e3™ is a variable speed, high-efficiency wet rotor circulator with an ECM permanent magnet motor. It's ideal for hydronic systems zoned with circulators or zone valves. With 3 easy settings, the 0015e3 delivers performance, reliability and ease of installation that made the 00® famous. Install it, forget it!™ Features: BIO Barrier® protects the pump from system contaminants SureStart™ automatic unblocking and air purging mode High-efficiency ECM motor uses up to 85% less electricity IFC® (Integral Flow Check) is included 3 easy settings: LOW (5 ft. head), MEDIUM (10 ft. head), HIGH (18... Read more

Taco 00e Series 0018e High Efficiency Circulator

Taco 00e Series Infinitely Variable Speed Circulator Pump Efficiency Uncomplicated 0018e3-2F2 Taco Cast Iron ECM High Efficiency Circulator Bluetooth, Two Bolt Flange. The 00e® series - Taco 0018e featuring Bluetooth is a versatile, variable speed, high-efficiency wet rotor circulator with an ECM permanent magnet motor. Download the Taco 0018e Mobile App to see and control real-time system performance. Run system operation & validation reports including performance diagnostics & history. Know the most efficient setting based on real-time feedback and alleviate the problems of over-pumping. You design systems with precision. The 0018e offers the performance & control to match. Features: High-efficiency... Read more

Taco 00e Series VT2218 High Efficiency Circulator

Taco 00e Series VT2218 High Efficiency Delta-T Circulator Pump The only temperature sensing pump in its class The 00e Series VT2218 circulator is a temperature sensing, self-adjusting, variable speed wet rotor circulator with an ECM permanent magnet motor. Operating modes include Delta-T differential temperature, 4 fixed speeds, set point heat, set point cool and boiler protection. Features: Delta-T operation maximizes system efficiency and comfort High-efficiency ECM motor uses up to 85% less electricity Can save hundreds in fuel costs LCD displays operating mode,temperature or speed setting, watts, supply & return temperatures Easy to program and install Sure Start automatic unblocking... Read more

Taco 00e Series 0026e High Efficiency Circulators

Taco 0026e™ ECM High-EfficiencyCirculator Pumps The 0026e™ is a high-performance, variable speed, wet-rotor circulator with high-efficiency ECM permanent magnet technology. With 5 easy settings, its variable speed performance curves are equivalent to the Taco 0010, 0011, 0012, 0012 3-Speed & 0014. Ideal for large residential and light commercial hydronic heating, chilled water cooling and domestic hot water systems. The 0026e reduces power consumption by up to 85&per; compared to equivalent AC permanent split capacitor circulators. With a maximum of 26 feet of head and 44 gpm, it is available in either Cast Iron or NSF certified Stainless Steel. Features of... Read more

Taco 00e Series 0034e High Efficiency Circulators

Taco 0034e™ ECM High-EfficiencyCirculator Pumps The 0034e™ is a high-performance, variable speed, wet-rotor circulator with high-efficiency ECM permanent magnet technology. With 5 easy settings, its variable speed performance curves are equivalent to the Taco 009, 0010, 0011, 0012, 0012 3-Speed, 0013, 0013 3-Speed & 0014. Ideal for large residential and light commercial hydronic heating, chilled water cooling and domestic hot water systems. The 0034e reduces power consumption by up to 85% compared to equivalent AC permanent split capacitor circulators. With a maximum of 34 feet of head and 50 gpm, it is available in either Cast Iron or NSF certified... Read more

Taco 00e Series VR3452 High Efficiency Circulator

Taco VR3452 ECM High-Efficiency Circulator Taco 00e™ series VR3452 circulator is a self-adjusting, high-efficiency wet rotor circulator for chilled and hot water applications. All settings can be accomplished on the user-friendly interface. The ECM permanent magnet motor saves up to 85% of the electrical energy compared to conventional pumps. Features: High-efficiency ECM motor uses up to 85% less electricity LED displays watts, flow & RPM Compact size for easy handling and installation Plug & play simplicity Robust construction for long life Industry standard flange configuration and lay length Low noise operation Cataphoresis coated volute Communication module (Standard on -FC1A01 models)... Read more

Taco 00e Series VR15-VR30 Viridian Pumps

Taco 00e Series Viridian Pumps The Taco 00e® VR series are ECM high-efficiency, wet-rotor, self-sensing commercial circulators ideal for HVAC and potable water applications. The wide range of models with Low, Medium, or High head options provide differ- ential head pressures up to 65 ft. and flow ranges up to 320 GPM. BMS communication with Modbus, BACnet, 0-10Vdc, and PWM come standard while high-efficiency ECM technology reduces power consumption up to 85%. The stainless steel models are NSF 61 & 372 domestic and commercial hot rated. Features: Intuitive user interface with real-time feedback Constant speed, constant pressure, proportional pressure, and... Read more

Taco Shut-Off Freedom Swivel-Flanges

Taco Shut-Off Freedom Swivel-Flanges Make quick work of pump installation & maintenance Taco Shut-Off Swivel-Flange® sets combine a full-port ball valve and companion flange to isolate system circulators for easy removal and service without draining the system. Simplify your next 00® circulator installation while saving material and labor costs. Solid brass uni-body construction, available in ½" - 1½" NPT or Sweat connections. The Swivel-Flange allows easier installation and convenient positioning of the pump and lever handle. Features Easy 1/4 turn open/close operation Positive shut-off, leak-free design Swivel flange allows 360° rotation Solid brass construction Chrome/brass valve ball High-quality Teflon seats... Read more

Taco 006e SmartPlus-e ECM Instant Hot Water System

Taco 006e3™ ECM High-Efficiency Hot Water Circulation PumpThe 006e3 perfect for any instant hot water system The 00e Series® — 006e3 is an infinitely variable fixed speed, high-efficiency wet rotor circulator with an ECM permanent magnet motor. It is perfect for hot water recirculation and hydronic heating applications. With 3 easy settings, the 006e3 delivers performance, reliability and ease of installation that made the 00® famous Features: Quick & easy installation Optional SmartPlus-e controller plug learns hot water usage patterns Optional Hot Link Valve retrofits with no additional hard plumbing High-efficiency ECM motor uses up to 85% less electricity SureStart®... Read more

Taco 00 Series Cartridge Circulators

Taco 00 Series Cartridge Circulators Complete line of water circulation pumps From the compact, low flow 003 to the high-head 0013, there's a Taco Circulator to fit your residential or light commercial application. Installation is quick and easy, and maintenance is a snap. With no mechanical seal, the self-lubricating design provides unmatched reliability. Every 00® pump features a field-replaceable cartridge that contains all the moving parts. IFC® Cartridge Circulators feature an Integral Flow Check, eliminating additional installation costs associated with separate in-line flow checks. The IFC® also improves system performance and is easy to maintain. Taco's 00® circulators are ideal... Read more

Taco Variable Speed Delta T 00 Circulators

Taco Variable Speed Delta T Circulators Differential Temperature Circulators Taco Variable Speed Delta T Circulators' all-in-one design combines a microprocessor-based variable speed differential controller with the reliability and convenience of our 00® Cartridge Circulators. Simply dial in the design delta T of the system or zone (from 5°-50°F) and then sit back and watch the circulator automatically adjust its performance to match the system's ideal BTU/hr output while conserving energy and eliminating velocity noise. Features: All-in-One Pump & Control Available in 003 – 0014 Models Sensors Included Easy to Install UL Approved Snap-in PC Board LED Status Panel Fuse Protected... Read more

Taco Variable Speed Solar Control 00 Circulators

Taco Variable Speed Solar Control Circulators Maximize the efficiency of your solar hot water system The Taco Variable Speed Solar Control Circulators combine the advanced features of our external speed and solar controls with the reliability and convenience of our 00® Cartridge Circulators. All the wiring for power and sensors is done directly to the circulator while the LED status panel makes it easy to check functionality. Dip switch based user configurable settings makes for a fast set-up, no matter the solar application. The circulator continually adjusts its speed, maximizing the output of the collector, increasing the usable higher temperature... Read more

Taco Variable Speed Outdoor Reset 00 Circulators

Taco Variable Speed Outdoor Reset Control Circulators Maximize the efficiency of your heating system The Outdoor Reset Circulator controls the hot water supply temperature, so that the heat supplied to the building equals the heat loss of the building. The 00-VR modulates the circulator to inject hot water from the boiler loop into the radiant or reduced temperature loop while providing Outdoor Reset to a heating system. Available in any style 003 - 0014, the 00-VR also comes with a boiler sensor to protect against low return temperatures. The 00-VR is the ultimate for protection, control, ease of installation, and... Read more

Taco Variable Speed Setpoint 00 Circulators

Taco Variable Speed Setpoint Control Circulators Maximize the efficiency of your heating system The versatile Setpoint version of the Variable Speed “00” can be set up to deliver a fixed temperature, maintain a specific temperature drop between sensor locations (DT), used as a bypass/shunt pump, or integrated into a fan coil package to vary the speed of the pump based on supply air temperature. The 00-VS can be either direct-acting (speed increases on a temperature decrease) or reverse-acting (speed increases on a temperature increase). A typical direct-acting (limiting setpoint) application would be for boiler protection, where the 00-VS is installed... Read more

Taco 2400 Series High Capacity Circulators

Taco 2400 Series High Capacity Circulators Taco 2400 Series High Capacity Circulators are specifically designed for quiet, efficient, dependable operation in a wide range of medium to high flow/head hydronic heating, chilled water cooling and hot water recirculation applications. The space saving, close-coupled, maintenance free motor with permanently lubricated, sealed-for-life bearings, stainless steel shaft, Noryl® impeller and durable, carbon/silicon-carbide mechanical seal provide unmatched reliability. 2400 High Capacity Pump Curve Chart Flanges sold separately. Use with: Taco Shut Off Freedom Flanges... Read more

Taco Variable Speed Variable Voltage Circulators

Taco Variable Speed Variable Voltage Circulators Variable Voltage Circulators The Variable Voltage version of the Variable Speed “00” Circulator is designed to operate the pump at different speeds based on an externally-generated analog voltage signal input. Its reliable operation, ease of installation and integration to DDC or building management systems allows for a wide variety of HVAC applications, such as maintaining a pressure differential or a setpoint temperature. The control accepts a 0-10 V(dc), 0-20 mA, 2-10 V(dc), or 4-20mA signal Features: 4 Signal Voltage Ranges (0-10 V(dc), 0-20 mA, 2-10V(dc), or 4-20 mA) Internal LEDs Manual Operation Switch Linear... Read more

Taco X-Pump Block

Taco Pumps  X-Pump Block XPB-1 Open system vs. closed? Barrier vs non-barrier tubing? Boiler vs. water heater? The debate ends here. The Taco X-Pump Block™ (XPB) delivers unmatched flexibility in a single unit. It is equally effective when used with open or closed systems, barrier or non-barrier tubing and where the system heat source is a boiler or water heater. The Taco X-Pump Block™ combines a variable speed mixing control, a heat source circulator, system circulator and heat exchanger in a single unit. This combination delivers complete system isolation between the heat generation side of the system and the heat... Read more

Taco Radiant Mixing Block

Taco Pumps Radiant Mixing Block RMB-1 The Taco Radiant Mixing Block is a breakthrough in the design, control and installation of radiant systems. The RMB-1 is a complete injection mixing system, combining a variable speed injection mixing control, injection circulator, system circulator and air elimination all in a single unit. You get unmatched versatility and performance as a result. Features Use as an outdoor reset control, a setpoint control or a delta T limiting control. Requires only four pipe connections for complete installation. Does not require special piping, balancing valve, closely spaced tees, external control or complex wiring. Plug-in, low... Read more

Taco Plumb n' Plug Circulators-No Timer

Taco Pumps Plumb n'Plug Circulators - No Timer Line Cord Only Option For recirculation systems set up for constant circulations or with an optional aquastat control, use Plumb n' Plug with line cord only. Simply Plumb it in and Plug it in. The 003 and 006 Plumb n' Plug Circulators periodically re-circulate hot water through the domestic piping system to decrease the delivery time to outlet fixtures and reduce wasted water. These UL-listed units feature quiet, efficient operation and low power consumption. Self lubricating, with no mechanical seal and Taco's unique replaceable cartridge design, Plumb n' Plug circulators are field... Read more

Taco Plumb n' Plug Circulators-Digital Timer

Taco Pumps Plumb n' Plug Circulators - Digital Timer Re-circulate hot water through the domestic piping system to decrease the delivery time to outlet fixtures and reduce wasted water. Taco Plumb n' Plug Circulators periodically re-circulate hot water through the domestic piping system to decrease the delivery time to outlet fixtures and reduce wasted water. These UL-listed units feature quiet, efficient operation and low power consumption. Self lubricating, with no mechanical seal and Taco's unique replaceable cartridge design, Plumb n' Plug circulators are field serviceable and maintenance free. An optional Aquastat is available for constant circulation applications to maintain temperature... Read more

Taco Plumb n' Plug Circulators-Analog Timer

Taco Pumps Plumb n' Plug Circulators - Analog Timer Taco Plumb n' Plug Circulators periodically re-circulate hot water through the domestic piping system to decrease the delivery time to outlet fixtures and reduce wasted water. These UL-listed units feature quiet, efficient operation and low power consumption. Self lubricating, with no mechanical seal and Taco's unique replaceable cartridge design, Plumb n' Plug circulators are field serviceable and maintenance free. An optional Aquastat is available for constant circulation applications to maintain temperature between 95°F and 115°F. Features: Factory installed 6' line cord and 24 hour/15 minute interval analog timer UL listed Optional... Read more

Taco Commercial Pumps

Taco Commercial Pumps Special Order The complete line of Taco commercial pumps are available. Please call 866-361-4782 with your specs.     Taco Shut Off Freedom Flanges... Read more

Taco Replacement Parts & Accessories

Taco Replacement Parts & Accessories Replaceable Cartridges & Other Parts... Read more

Taco Genie

TacoGenie Save water, energy and money Have hot water at your fingertips whenever you turn the faucet. Stop wasting water as you wait for cold to turn to hot. The TacoGenie™ is a small, silent pump attached to your hot and cold water lines in the cabinet under your most remote kitchen or bath fixture. When the TacoGenie™ is activated, the cool water you normally let run down the drain is circulated back to the water heater through the cold water line. Instantly the pump circulates hot water from the water heater, and returns the cooled water back through the... Read more

Contact

Toll Free: (866) 361-4782

Fax: 206-274-1501

17420 Vashon Hwy SW
PO Box 2270
Vashon, WA 98070

Copyright © 2024 BlueRidgeCompany.com All rights reserved.