1-866-361-4782

Home Documents Contacts Shipment Tracking

PEX Tubing | RHT Pex B Tubing Oxygen-Barrier

RHT Pex B Tubing Oxygen-Barrier PEX tubing from RHT is your best choice for in-floor radiant heating. Our tubing is a crosslinked polyethylene PEX pipe (Pex-B) created with the silane cross-linking method (similar to Zurn Pex and Watts RadiantPEX). It fully meets today's strict ASTM F 876 and 877 standards for PEX radiant tubing. RHT Radiant PEX is produced with a strong Oxygen-Barrier and can be used with either ferrous or non ferrous systems. Coil lengths: 300ft, 500ft, 900ft, 1,000ft. Compatible with the following connection systems: Crimp Tool, Crimp Rings and Crimp Fittings Ratchet Clamp Tool, Stainless Steel Cinch Clamps,... Read more

PEX Tubing | RHT USA Oxygen-Barrier

RHT USA PEX Tubing Oxygen-Barrier RHT PEX Tubing is made in America using the most environmentally friendly method of PEX tubing production - electron beam processing in a "cold" cross-linking process (below the crystal melting temperature). This fully meets today's strict ASTM F 876, 877 and NSF 14/61 standards for PEX radiant tubing, and is also certified for use with potable water. RHT Radiant PEX is produced with a strong Oxygen-Barrier and can be used with either ferrous or non ferrous systems. Compatible with the following connection systems: Crimp Tool, Crimp Rings and Crimp Fittings. Ratchet Clamp Tool, Stainless Steel... Read more

PEX Tubing | RHT PEX-AL ON SALE NOW

RHT  PEX-AL-PEX Oxygen-Barrier Tubing ON SALE NOW 5% Discount at Checkout Enter Promo Code: AL5 Multi-Layer Pex Tubing with an Aluminum Core RHT PEX-AL-PEX is a multi-layered oxygen barrier tubing ideal for all radiant heating applications. The inside and outside layers are made of high-density polyethylene (HDPE) cross-linked (PEX) which is smooth, toxin-free and hygienic. These layers are tightly bonded with adhesive to the middle layer of aluminum which is 100 percent gas/oxygen tight. The aluminum layer is longitudinally welded in an overlapping manner and all layers are extruded in one step. The pex and aluminum layers combine to create... Read more

PEX Tubing | MrPEX Oxygen Barrier PEX tubing

MrPEX Oxygen-Barrier PEX Tubing MrPEX® EVOH Oxygen Barrier PEX tubing is cross-linked polyethylene (PEX-A) manufactured in accordance with ASTM F 876. Tubing is flexible, kink-resistant and listed to ASTM F 876/877 (CSA B137.5) and ICC-PMG 1053 standards. MrPEX® Barrier PEX tubing is also certified by NSF and rated by the Hydrostatic Stress Board of PPI at: 160 psi at 73.4°F; 100 psi at 180°F; 80 psi at 200°F. Tubing sizes 3/8" through 3/4" have a thin coating of PE on top of the barrier in order to reduce noise when installed in joist applications and with aluminum heat transfer plates.... Read more

Copyright © 2016 BlueRidgeCompany.com
All rights reserved.