| 1 |
|
|
90 Degree Bends
PEX Elbows Pre-formed 90's are convenient for turning PEX Turn PEX in tight spaces Direct PEX out of concrete up to manifold area Guide PEX out of a wall system to a radiator... 
|
|
| 2 |
|
|
RHT Pressure Test Kits
RHT PEX Pressure Test Kit Test your PEX with air pressure Our RHT pressure test kits come in many different configurations. Each has an RHT pressure gauge and a SharkBite ¾” MNPT x PEX connector. Also included is a SharkBite PEX x end stop plug and straight PEX x PEX connectors. Once your PEX is in place, all lines can be connected together as one long loop with the gauge on one end and the end cap at the other end, allowing you to pressure-up your system for inspection....
|
|
| 3 |
|
|
PEX Pipe Cutter
RHT PEX Cutter ON SALE NOW!...
|
|
| 4 |
|
|
PEX-AL Reamer
RHT PEX-AL Reamer Tool Finishes the ends of PEX-AL tubing for clean and proper fit...
|
|
| 5 |
|
|
PEX Tubing Tools
PEX Tubing Tools Everything you need to work with PEX PEX Crimping Tool for SDR9 compatible tubing PEX Pipe Cutter PEX Reaming Tool...
|
|
| 6 |
|
|
RHT Foam Stapler and Staples
RHT Foam Stapler Attaches PEX Tubing to Foam Underlayment Upright walking stick (no bending over) Securely holds PEX Pipe to 1 or 2 inch foam RHT staples are also compatible with Roth Tool...
|
|
| 7 |
|
|
Peter Mangone Mesh Clip System
Peter Mangone Mesh Clip™ System A stand-up system that fastens PEX tubing to wire mesh Saves time... The tool accommodates as many as 100 clips from self-loading boxes, and attaches the tubing in no time at all... Saves wear and tear on your knees and back... This is a stand-up tool. No more crawling over wire mesh and gravel. No more bending to apply plastic ties... One tool does it all... In one motion, the Mesh Clip™ Tool lifts the wire and applies the clip....
|
|
| 8 |
|
|
Peter Mangone Reddi-Strip Stapler System
Peter Mangone Reddi-StripTM PEX Tubing to Foam Underlayment A "stand-up" tool, no more bending, no more sore knees. Less expensive to buy and less expensive to use. Excellent holding power on both open cell and closed cell foamboard. When fastening 5/8" tubing, for example, the staples will be driven in approximately 1 1/4" to hold the PEX securely. No more loose staples, no more tape to strip off. Just load the strips, position the stapler over the PEX, and fire away! Staples come in easy-to-load flexible strips. Reddi StripTM Stapler for use with Reddi StripTM Staples ONLY. Stapler is not...
|
|
| 9 |
|
|
PEX Uncoiler Rentals
PEX Uncoiler Rentals Turn a two man job into a one man job Keep PEX coil in one spot Prevent kinks and tangles These tools are available for rent. The unit price listed is the deposit. See BlueRidge Company Rental Policy for details....
|
|
| 10 |
|
|
Peter Mangone RB Clip Gun System
RB Clip Gun Systems PEX Tubing to Plywood Manual or Pneumatic clip guns Stand-off or Flush clips 3/8", 1/2", and 3/4" clips available...
|
|
| 11 |
|
|
Wire Tying Tool & Ties
Wire Ties & Tool Wire/Bag Ties for attaching PEX tubing to rebar grid. The quickest and simplest method of attaching PEX tubing to your reinforcing grid in slab....
|
|
