| 1 |
|
|
SharkBite Connection System
SharkBite Connections Push-Fit Fittings, Domestic and Radiant applications The SharkBite® connection system uses an advanced push-fit design that works in two stages. When the tube is inserted into the fitting it passes the first stage through a release collar and then through a stainless steel grab ring. The grab ring has teeth that open out and grip onto the tube. At the second stage the tube is pushed through an o-ring protector which aligns the tube. A specially formulated o-ring is then compressed between the wall of the fitting and the tube before the end of the tube reaches the... 
|
|
| 2 |
|
|
RHT Non-Potable PEX A,B,C Crimp Fittings
PEX Fittings Non-Potable Crimp and Sweat PEX Couplings (pex to pex) PEX to NPT PEX to Sweat Fittings on this page are not for Domestic Water Potable use. For Potable fittings see Sioux Chief or Shark Bite....
|
|
| 3 |
|
|
Sioux Chief PEX Fittings
Sioux Chief PEX Fittings for Domestic and Hydronic Plumbing Copper fittings are Type L Copper Copper fittings are guaranteed when Souix Chief Crimp Ring is used Makes the transition from PEX to Copper Simple!...
|
|
| 4 |
|
|
RHT 90 Degree Bends
RHT PEX Elbows Pre-formed metal 90's are convenient for turning PEX Pre-formed metal 90's are convenient for turning PEX in tight spaces To bring PEX out of concrete up to manifold area Out of a wall system to a radiator....
|
|
| 5 |
|
|
RHT Non-Potable PEX-AL Compression Fittings
PEX-AL Fittings Non-Potable Compression Fittings PEX Couplings (pex to pex) PEX to NPT PEX to Sweat PEX-AL-PEX, and PEX-AL-PEX Fittings are not for Domestic Water Potable use....
|
|
| 6 |
|
|
RHT Pressure Test Kits
RHT PEX Pressure Test Kit Test your PEX with air pressure Our RHT pressure test kits come in many different configurations. Each has an RHT pressure gauge and a SharkBite ¾” MNPT x PEX connector. Also included is a SharkBite PEX x end stop plug and straight PEX x PEX connectors. Once your PEX is in place, all lines can be connected together as one long loop with the gauge on one end and the end cap at the other end, allowing you to pressure-up your system for inspection....
|
|
