Free Shipping on orders over $300 1-866-361-4782

RHT Concrete Insulation Panel System


Fast. Easy. Save on labor. Just walk it in.

RHT Under Concrete Insulation Panel System dramatically reduces installation time and labor cost, and provides a built-in method of optimizing heat dispersion after installation. Panels are manufactured in the USA out of BASF Styropor and Neopor EPS to offer superior strength and insulating properties. RHT's innovative snap-together, pre-molded tubing channel system allows for simple, efficient installation while maintaining proper tube alignment. RHT Under Concrete Insulation Floor Panels have 2" on center channels meaning the tube spacing could be 6", 8", 10", 12", 14", 16", or further increments of 2". The panels can fit ½" and ⅝" PEX tubing. Ideal for new or existing residential and commercial buildings, for melting snow & ice on driveways & walkways or for heating patios.

Features:

  • Optional PSi density RHT Standard 25 PSI, RHT Plus 40PSI
  • Saves installation time and labor cost - no need to tie, clip, staple or screw to substrate.
  • Snap-tight grid of pre-slotted channels for uniform tube placement and equal heat dispersion.
  • Eliminates on-site trip hazards.

RHT panels ship truck freight and are not eligible for free shipping.
Shipping costs vary widely depending upon quantity and destination.
Call 866-361-4782 or email sales@blueridgecompany.com for a custom freight quote prior to ordering.
Actual shipping is always different than cost auto-calculated by website.
All sales of insulation products are final, no returns are accepted.

↓   Insulation with Snap-In PEX Guides   ↓

RHT 1" Easy Floor Standard panels R-5 Full 1 inch EPS foam under panel Dimensions 1-7/8” x 2’ x 4’ rated for 25 PSI. Priced per bundle 14 panels 112 sq.ft. Due to the volume of this product and distance to ship to locations Additional freight charges may be required.

Part No: RHT 1" Standard 25 PSI

$102.48 each

RHT 1" Easy Floor Plus 40 PSI panels R-5 Full 1 inch EPS foam under panel Dimensions 1-7/8” x 2’ x 4’ rated for 40 PSI. Priced per bundle 14 panels 112 sq.ft. Due to the volume of this product and distance to ship to locations Additional freight charges may be required.

Part No: RHT 1" Plus 40 PSI

$130.20 each

RHT 2" Easy Floor Standard panels R-10 Full 2" EPS foam under panel Dimensions 2-7/8” x 2’ x 4’ rated for 25 PSI. Priced per Bundle of 9 panels 72 sq.ft. Due to the volume of this product and distance to ship to locations Additional freight charges may be required.

Part No: RHT 2" Standard

$98.56 each

RHT 3" Easy Floor Standard panels R-15 Full 3" EPS foam under panel Dimensions 3-7/8” x 2’ x 4’ rated for 25 PSI. Bundle of 6 panels 48 sq.ft. Due to the volume of this product and distance to ship to locations Additional freight charges may be required.

Part No: RHT 3" Standard

$79.50 each
↓   Flat Insulation   ↓

Dimensions: 2.3” x 4’ x 8’ Density: 2# R-10, 25 PSI value reflective laminate 1 side, non reflective laminate 1 side. Bulk orders only, price per sheet, Most orders we will need to calculate real freight value add freight cost to order. sold in lots of 15 units

Part No: RHT 2" under slab 25 PSI insulation

$26.96 each

Dimensions: 2.3” x 4’ x 8’ Density: 2.5lb. R-10, 40 PSI value laminate both sides. Bulk orders only, price per sheet, Most orders we will need to calculate real freight value add freight cost to order. sold in lots of 15 units

Part No: RHT 2" under slab 40 PSI insulation

$38.47 each

2.3" Under slab foam 25psi with out reflective laminate both sides Freight charges may apply sold in lots of 15 units

Part No: 2 3" Under slab w/o reflective

$24.00 each

Contact

Toll Free: (866) 361-4782

Fax: 206-274-1501

17420 Vashon Hwy SW
PO Box 2270
Vashon, WA 98070

Copyright © 2016 BlueRidgeCompany.com All rights reserved.