| 1 |
|
|
RHT Pressure Test Kits
RHT PEX Pressure Test Kit Test your PEX with air pressure Our RHT pressure test kits come in many different configurations. Each has an RHT pressure gauge and a SharkBite ¾” MNPT x PEX connector. Also included is a SharkBite PEX x end stop plug and straight PEX x PEX connectors. Once your PEX is in place, all lines can be connected together as one long loop with the gauge on one end and the end cap at the other end, allowing you to pressure-up your system for inspection.... 
|
|
| 2 |
|
|
Pex Tubing Tools
PEX Tubing Tools Everything you need to work with PEX PEX Crimping Tool for SDR9 compatible tubing PEX Pipe Cutter PEX Reaming Tool...
|
|
| 3 |
|
|
RHT PEX-AL Reamer
RHT PEX-AL Reamer Tool Finishes the ends of PEX-AL tubing for clean and proper fit...
|
|
| 4 |
|
|
RHT PEX Cutter
RHT PEX Cutter ON SALE NOW!...
|
|
| 5 |
|
|
RHT Foam Stapler and Staples
RHT Foam Stapler Attaches PEX Tubing to Foam Underlayment Upright walking stick (no bending over) Securely holds PEX Pipe to 1 or 2 inch foam RHT staples are also compatible with Roth Tool...
|
|
| 6 |
|
|
Peter Mangone Reddi-Strip Stapler System
Peter Mangone Reddi-StripTM PEX Tubing to Foam Underlayment A "stand-up" tool, no more bending, no more sore knees. Less expensive to buy and less expensive to use. Excellent holding power on both open cell and closed cell foamboard. When fastening 5/8" tubing, for example, the staples will be driven in approximately 1 1/4" to hold the PEX securely. No more loose staples, no more tape to strip off. Just load the strips, position the stapler over the PEX, and fire away! Staples come in easy-to-load flexible strips. Reddi StripTM Stapler for use with Reddi StripTM Staples ONLY. Stapler is not...
|
|
| 7 |
|
|
Tools That Rock PEX Uncoiler
Rock Unroller ™ FREE SHIPPING Easy Installation of PEX pipe Entire Unit Folds into Carrying Case This tool is available as a weekly rental $100.00 per week...
|
|
| 8 |
|
|
RHT Pex Pipe Holders
RHT PEX Pipe Holders The easy way to attach PEX to many surfaces Complete range of sizes from 1/2" to 1" Single Pipe Holders Double Pipe Holders Pipe Holders that attach to Wire Mesh Full Capture Pipe Holders All measurements are I.D. (inner dimensions) of the pipe to be clamped...
|
|
| 9 |
|
|
Peter Mangone RB Clip Gun System
RB Clip Gun Systems PEX Tubing to Plywood Manual or Pneumatic clip guns Stand-off or Flush clips 3/8", 1/2", and 3/4" clips available...
|
|
| 10 |
|
|
RHT 90 Degree Bends
RHT PEX Elbows Pre-formed metal 90's are convenient for turning PEX Pre-formed metal 90's are convenient for turning PEX in tight spaces To bring PEX out of concrete up to manifold area Out of a wall system to a radiator....
|
|
| 11 |
|
|
Wire Tying Tool & Ties
Wire Ties & Tool Wire/Bag Ties for attaching PEX tubing to rebar grid. The quickest and simplest method of attaching PEX tubing to your reinforcing grid in slab....
|
|
