1-866-361-4782 | McAfee SECURE sites help keep you safe from identity theft, credit card fraud, spyware, spam, viruses and online scams Hello, You can log in here.

Shop by Department
 
Home > PEX Tubing > PEX for Radiant Heating
1   PEX Tubing | RHT Pex B Tubing Oxygen-Barrier

RHT Pex B Tubing Oxygen-Barrier PEX tubing from RHT is your best choice for in-floor radiant heating. Our tubing is a crosslinked polyethylene PEX pipe (Pex-B) created with the silane cross-linking method (similar to Zurn Pex and Watts RadiantPEX). It fully meets today's strict ASTM F 876 and 877 standards for PEX radiant tubing. RHT Radiant PEX is produced with a strong Oxygen-Barrier and can be used with either ferrous or non ferrous systems. Coil lengths: 300ft, 500ft, 900ft, 1,000ft. Compatible with the following connection systems: Crimp Tool, Crimp Rings and Crimp Fittings Ratchet Clamp Tool, Stainless Steel Cinch Clamps,...

2   PEX Tubing | RHT USA Oxygen-Barrier

RHT USA PEX Tubing Oxygen-Barrier RHT PEX Tubing is made in America using the most environmentally friendly method of PEX tubing production - electron beam processing in a "cold" cross-linking process (below the crystal melting temperature). This fully meets today's strict ASTM F 876, 877 and NSF 14/61 standards for PEX radiant tubing, and is also certified for use with potable water. RHT Radiant PEX is produced with a strong Oxygen-Barrier and can be used with either ferrous or non ferrous systems. Compatible with the following connection systems: Crimp Tool, Crimp Rings and Crimp Fittings. Ratchet Clamp Tool, Stainless Steel...

3   PEX Tubing | RHT PEX-AL-PEX Multilayer Tubing

RHT PEX-AL-PEX Oxygen-Barrier Tubing Multi-Layer Pex Tubing with an Aluminum Core RHT PEX-AL-PEX is a multi-layered oxygen barrier tubing ideal for all radiant heating applications. The inside and outside layers are made of high-density polyethylene (HDPE) cross-linked (PEX) which is smooth, toxin-free and hygienic. These layers are tightly bonded with adhesive to the middle layer of aluminum which is 100% gas/oxygen tight. The aluminum layer is longitudinally welded in an overlapping manner and all layers are extruded in one step. The pex and aluminum layers combine to create flexible, rust-free tubing that will not corrode, stays in place when bent and...

4   PEX Tubing | MrPEX Oxygen Barrier PEX tubing

MrPEX Oxygen-Barrier PEX Tubing MrPEX® EVOH Oxygen Barrier PEX tubing is cross-linked polyethylene (PEX-A) manufactured in accordance with ASTM F 876. Tubing is flexible, kink-resistant and listed to ASTM F 876/877 (CSA B137.5) and ICC-PMG 1053 standards. MrPEX® Barrier PEX tubing is also certified by NSF and rated by the Hydrostatic Stress Board of PPI at: 160 psi at 73.4°F; 100 psi at 180°F; 80 psi at 200°F. Tubing sizes 3/8" through 3/4" have a thin coating of PE on top of the barrier in order to reduce noise when installed in joist applications and with aluminum heat transfer plates....


Home | Downloads | Contacts | Privacy Policy | Terms & Conditions | Policies & Guidelines | Articles   
Copyright © 2014 BlueRidgeCompany.com All rights reserved.
Maintained by: blueridgecompany.com

Secure 128bit - SSL Ordering By GeoTrust Nextag Seller