| 1 |
|
|
Taco 4900 Series Air Separator
Taco 4900 Series High Efficiency Air Separators The high efficiency Taco 4900 Series Air Separator uses patented PALL ring technology to clear the system of microbubbles, sand, dirt and rust to save money, energy and component wear. PALL rings are used in the processing industry to mix gases with, or separate gases from, liquids. By applying PALL ring technology to hydronic air and dirt separation, the 4900 Series will: Remove microbubbles as small as 18 x 10 6 meters from the system Remove air that has dissolved in the system water Remove air from places where an air vent can’t... 
|
|
| 2 |
|
|
B&G EASB-Jr Enhanced Air Separator
B&G EASB-Jr Enhanced Air Separator Automatically removes entrained air bubbles in hydronic systems Bell & Gossett's Model EASB-Jr Enhanced Air Separator automatically removes entrained air bubbles in hydronic systems. As fluid enters the EASB-Jr, the velocity is decreased creating a low pressure area. The small bubbles are released from fluid and then collected on the coalescing medium. As the bubbles coalesce, they rise to the top of the air separator where they are released to atmosphere through the built-in automatic air vent. The air separator has a bottom 1/2"NPT connection to accommodate a B&G diaphragm expansion tank. The compact design...
|
|
| 3 |
|
|
Taco Air Vents
Taco Automatic Air Vents The industry standard for more than 30 years. HVAC professionals have recognized Taco Automatic Air Vents as the industry standard for more than 30 years. Attached to the boiler or used through the system, Taco Vents automatically purge unwanted air from any hydronic installation, allowing the system to run more efficiently. Taco Hy-Vents The high-capacity, float-style vent can be placed either on the boiler or at the high points throughout the system. With threaded connections -- 1/8", 1/4", 1/2" and 3/4" -- and operating pressure ratings up to 250 psi, these brass-body, nickel-plated vents meet the...
|
|
| 4 |
|
|
B&G Inline Air Separator
B&G Inline Air Separator Efficiently separate air The B&G In-Line Air Separator is specifically designed to efficiently separate air from circulating water in hydronic heating and cooling systems to assure quiet operation....
|
|
| 5 |
|
|
B&G Enhanced Air Separator
B&G EAS Enhanced Air Separator Patented, innovative design Bell & Gossett's Model EAS Enhanced Air Separator is a patented, innovative design in air separators. It has been engineered to remove entrained air from hydronic heating and cooling systems, providing far superior air removal compared with other devices available today. The EAS is ideal for residential, institutional and light commercial applications....
|
|
| 6 |
|
|
Taco Vortech Air Seperator
Taco Air Seperation VorTech Air Separator Designed to provide an enhanced level of air removal. The Taco VorTech Air Separator is designed to provide an enhanced level of air removal in hydronic heating, cooling or combination systems. Air is quickly and efficiently separated and vented through a factory-installed Taco 3/4" Hy-Vent. Taco's innovative tangential flow pattern, primary separation chamber and standard Taco Hy-Vent make the VorTech the most effective and reliable air separator you can buy. Features Include: Requires No Minimum Run of Pipe Convenient 1/2" Bottom Tapping for Installation of Expansion Tank Cast Iron Body and Cap Stainless Steel...
|
|
|
